金沙国际官网

What are the performance and characteristics of the welding machine?
Release time:2022-03-15

Any machine itself has many performance and characteristics, and it is precisely because of these performance and characteristics that people like it so much. The same goes for touch welding machines. So, what are the performance and characteristics of Dongguan touch welding machines?

1. The machine has a box shaped structure, good rigidity, pneumatic pressurization, adjustable pressurization, and flexible and reliable transmission parts.

2. The secondary to point section adopts an upper insulation method, which can avoid short circuit accidents in the insulation part caused by the assistance of iron chips or the installation and welding of workpieces.

3. The upper and lower electrodes are pressurized with auxiliary stroke to improve the operability and versatility during welding. The speed of the pressure electrode can be adjusted arbitrarily, which reduces the impact when applying pressure to the welded object. It also reduces the noise during welding.

4. The transformer adopts a low impedance design, and high-quality conductive materials are used in the secondary circuit to reduce internal friction. Obtained lower power input and higher welding current.

5. The main circuit is controlled by a water-cooled silicon SCR module, with continuously adjustable current and grid voltage fluctuation compensation function.

6. Can store 15 welding programs; Different welding specifications can be stored in different welding programs, making it very convenient and smooth to achieve accurate welding of different workpieces.

7. Equipped with a secondary feedback loop, it can continuously compensate for welding current and operates in two discharge modes. Greatly improve welding stability, special materials can be preheated or tempered.

8. The operation interface adopts a digital tube or LCD display, which is clear, concise, and intuitive.

9. Widely applicable to iron wire hardware, household appliance manufacturing, sheet metal processing manufacturing, microelectronics, and other fields.

10. Weldable materials: carbon steel, low-alloy steel, stainless steel, coated steel, aluminum, etc.

The above is the introduction by the editor about the performance and characteristics of the welding machine. We hope it can be helpful to everyone. If you have any other questions, please feel free to consult us.



  • WeChat QR code

  • WeChat official account

  • Tiktok enterprise account
Shenzhen Fusite Electronics Co., Ltd
  •  
    website:   www.styler.com.cn  
  •  
    Company Address: 921 Baoshan Times Building, Minqiang Community, Minzhi Street, Longhua District, Shenzhen, Guangdong Province
Dongguan Chuangde Laser Intelligent Technology Co., Ltd
  •  
    Phone: 13580722659
  •  
    Fax: 0769-81306766
  •  
    Email:   sales@styler.com.cn  
  •  
    Company Address: Building D, No. 81 Huahong Commercial East Street, Zhenxing North Road, Gaobu Town, Dongguan City, Guangdong Province
  •  
    Suzhou Office Address: No. 888 Yunchuang Road, Wujiang Economic and Technological Development Zone, Wujiang District, Jiangsu Province
CopyRight ? 2024 Dongguan Styler Laser Intelligent Technology Co., Ltd. All Right Reserved.粤ICP备19159359号
XML 地图 | Sitemap 地图