金沙国际官网

Basic knowledge of resistance welding
Release time:2022-03-15

1、 Precision resistance spot welding

When using metal materials to make parts, it is often necessary to cut the materials into specified sizes and then connect them together.
The methods of connecting materials include mechanical connection using rivets, metallurgical connection using welding, and physical connection using ultrasonic waves. Resistance spot welding is a method of efficiently and economically connecting metal materials using metallurgical techniques. Therefore, it is widely used in the industry.
We refer to the resistance welding of precision small workpieces as precision resistance spot welding.
Tian Tian Welding Technology has continuously developed various ultra small and high-density installable new precision resistance spot welding machines, replacing traditional metal connection processes such as soldering and riveting.
Precision resistance spot welding machine is the most suitable for assembling small and high-performance electronic components, as well as small components in the precision machinery industry.
      
The principle of resistance welding
Using Joule heating for welding
Q=0.24I2Rt=0.24IEt(cal)…①
Formula ① is shown in the following figure. The workpiece is pressurized and energized between the upper and lower electrodes for resistance welding.
When the resistance of the welding part is R (Ω), the welding current is I (A), and the energization time is t (sec), the welding part heats up according to formula ①. Therefore, the temperature of the welding part rises, causing melting.


2、 5 key elements of resistance spot welding
1. Current
2. Time
3. Add pressure
4. Current density (electrode tip diameter)
5. Electrode material

The above elements are related to the heat generation Q and heat generation location, which means that the factors affecting the welding effect during spot welding include: current I, energization time t, contact resistance R, current density (electrode tip), and electrode material. The contact resistance R decreases with the increase of applied pressure. The above elements are known as the five major elements of resistance spot welding.


contact resistance

The resistance caused by the thin oxide layer generated on the surface of the workpiece (skin resistance) and the resistance caused by the cross-section of the current flow (concentrated resistance).


3、 The role of electrodes
1. Conduct high current.
2. Apply pressure.
3. Improve the cooling effect of welding points.
4. Stabilize the current density.
The electrode has the above functions, and here we will explain the current density related to quality management.
Current density refers to the value of current per unit cross-section. If the current density is kept stable, welding defects can be prevented. Due to the need to conduct high currents (electrode action 1), the top of the electrode will generate heat; Due to the need for pressure, the electrode tip will widen and the current density will decrease. Therefore, as the number of welding cycles increases, the weld nugget will become smaller (poor welding). Therefore, electrode management (replacing or grinding the electrode after a certain number of welding cycles) becomes very important in welding quality management.

 

4、 Induction of Resistance Spot Welding Principle
1. Resistance spot welding method is a metal connection method that uses the resistance of the workpiece itself, the applied pressure on the workpiece, and the large current conducted to generate Joule heat at the contact part of the workpiece and perform melting.
2. The five key factors that determine welding quality:
[1] Current value
[2] Power on time
[3] Add pressure
[4] Current density
[5] Electrode material
       
5、 Selection of welding specifications
5-1. Selection of electrode materials
Principles of Selection:
① Workpieces with high intrinsic resistance ->Choose materials with low intrinsic resistance as electrodes
② Workpieces with low intrinsic resistance ->Choose materials with high intrinsic resistance as electrodes


  • WeChat QR code

  • WeChat official account

  • Tiktok enterprise account
Shenzhen Fusite Electronics Co., Ltd
  •  
    website:   www.styler.com.cn  
  •  
    Company Address: 921 Baoshan Times Building, Minqiang Community, Minzhi Street, Longhua District, Shenzhen, Guangdong Province
Dongguan Chuangde Laser Intelligent Technology Co., Ltd
  •  
    Phone: 13580722659
  •  
    Fax: 0769-81306766
  •  
    Email:   sales@styler.com.cn  
  •  
    Company Address: Building D, No. 81 Huahong Commercial East Street, Zhenxing North Road, Gaobu Town, Dongguan City, Guangdong Province
  •  
    Suzhou Office Address: No. 888 Yunchuang Road, Wujiang Economic and Technological Development Zone, Wujiang District, Jiangsu Province
CopyRight ? 2024 Dongguan Styler Laser Intelligent Technology Co., Ltd. All Right Reserved.粤ICP备19159359号
XML 地图 | Sitemap 地图