金沙国际官网

Fiber laser welding machine is widely used at home and abroad
Release time:2021-11-11

Fiber laser welding machine It is widely used at home and abroad. In Japan, CO2 laser welding machine was used to replace flash butt welding for the connection of rolled steel coils in the steel industry. In the discussion of ultra-thin plate welding, for example, foil with a plate thickness of less than 100 microns, there is no way to fusion welding, but YAG laser welding with special output power waveform is successful, which shows a broad way out of laser welding.


金沙国际官网

Powder metallurgy category
With the continuous development of science and technology, many industrial technologies have special requirements for data, and the data produced by traditional technology can no longer meet the requirements.Laser welding machine Entering the field of powder metallurgy data processing has brought new development prospects for the use of powder metallurgy data. For example, the brazing method commonly used in powder metallurgy data connection is used to weld diamond. Due to low bonding strength and wide heat affected zone, especially unable to get used to high temperature and high strength requirements, the solder melts and falls, The selection of fiber laser welding machine can improve the welding strength and high temperature resistance.
electronics industry
Optical fiber laser welding machine has been widely used in electronic industry. Due to the small heat affected zone, rapid heating convergence and low thermal stress, laser welding shows unique advantages in the packaging of integrated circuits and semiconductor equipment shells. Laser welding has also been used in the development of vacuum equipment. The thickness of the elastic thin-wall corrugated sheet in the sensor or temperature controller is 0.05-0.1mm, which is difficult to solve by using traditional welding methods. TIG welding is easy to penetrate, plasma stability is poor, and there are many influencing factors. However, laser welding has a good effect and is widely used.
Car industry
Nowadays, the production line of optical fiber laser welding machine has appeared in the car manufacturing industry on a large scale, and has become one of the outstanding achievements of the car manufacturing industry. Many car manufacturers choose laser welding and cutting technology. High strength steel laser welding assemblies are used more and more in the manufacture of car body because of their excellent functions. Due to the large batch and high degree of automation of the car industry, the welding equipment will develop in the direction of high power and multi-channel.


  • WeChat QR code

  • WeChat official account

  • Tiktok enterprise account
Shenzhen Fusite Electronics Co., Ltd
  •  
    website:   www.styler.com.cn  
  •  
    Company Address: 921 Baoshan Times Building, Minqiang Community, Minzhi Street, Longhua District, Shenzhen, Guangdong Province
Dongguan Chuangde Laser Intelligent Technology Co., Ltd
  •  
    Phone: 13580722659
  •  
    Fax: 0769-81306766
  •  
    Email:   sales@styler.com.cn  
  •  
    Company Address: Building D, No. 81 Huahong Commercial East Street, Zhenxing North Road, Gaobu Town, Dongguan City, Guangdong Province
  •  
    Suzhou Office Address: No. 888 Yunchuang Road, Wujiang Economic and Technological Development Zone, Wujiang District, Jiangsu Province
CopyRight ? 2024 Dongguan Styler Laser Intelligent Technology Co., Ltd. All Right Reserved.粤ICP备19159359号
XML 地图 | Sitemap 地图